Application:
The AM Series amplifiers give you clean, dynamic power with the legendary sound quality and reliability that pros depend on. The AM Series deliver unmatched performance at a new breakthrough price.

Description:
The power supply is the heart of an amplifier, converting raw AC power from the wall to clean DC for the audio circuitry. The AM uses a powerful high - current toroidal transformer and ample filter capacitance to ensure generous energy reserves. This makes a critical difference in sound quality, allowing the amp to effortlessly punch out high level transients, even when driving abusive 2-ohm speaker loads.
AM Series amplifiers deliver true studio-quality sound. A full complementary output circuit using the highestgrade linear output devices deliver ultra-low distortion (<0.05% THD) & a ruler-flat frequency reponse. It enable pack up to 2400 watts of power in a chassis only 2 rack spaces & less than 16" deep. And unlike other designs, AM output devices are direct-mounted to the heat sink for optimum thermal coupling & cooling.

PARAMETER:
Model:
Output Power	8Ωper channel	1200W
	4Ω per channel	1800W
Bridgemono Power	8Ω	3500W
	4Ω	6200W
Frequency Response ref.100W@8W 20Hz-20Khz+0.1~0.2dB
Total Harmonic distoriton(THD) ≤0.01%
Noise unwidhted 20Hz-20KHz,ref full output ≥105dB
Input Sensitivity full rated power@8W 1.0Vrms
Input Impedance 10KΩunbalanced-20KΩbalanced
Crosstalk ≥64dB
Cmrr ≥70dB
Slew Rate 60V/us
Damping Factor 1KHz and Below ≥800
Limiter Compression Ratio 20:1
Connectors Input:balanced XLR Output:Neutrik Speakon?
Cooling Continuously variable speed fan,front-to-back air flow
Amplifier Protection Full short circuit,open circuit,thermal,ulfrasonic,and RF protection,stable into reactive or misatched loads
Voltge Range 220VAC 50Hz±10%